Menu

Menu

AGUA CALIENTE CAMPING CABINS X 8
Eight cabins for San Diego County Parks Department. These cabins were designed to fully meet California building, seismic and fire codes.

The entire process of manufacturing was managed using Merlin project management software. Building Information Modeling was used to create the building's parts, in order to parametrically test the building for fit.

From the model, architectural drawings are generated for permit and shop drawings for fabrication.
GANTT CHART PRODUCTION MANAGEMENT
Stacks Image 1578
Stacks Image 1974
BIM Rendered
Stacks Image 210
A Sheet
Stacks Image 225
Panel Shop Drawings
Stacks Image 1976
BIM
Stacks Image 212
A Sheet
Stacks Image 227
Sheathing Shop Drawings
L.A. CABIN
One cabin for a private customer in the City of Los Angeles. Building Information Modeling was used to create the building's parts, in order to parametrically test the building for fit. This building fully meets current California building, seismic and fire codes.

The Building Information Model was created from an existing set of 2d drawings. Rather than creating built-in compliance into a design, I had to model to the specifications.

From that model, shop drawings are created for fabrication of the building.
Stacks Image 1948
BIM Rendering
Stacks Image 1946
BIM
Stacks Image 1950
Shop Drawings
OWNER'S CABIN
One cabin, in an order of eleven, for a private customer on a private island called Musha Cay in Exuma. Building Information Modeling was used to create the building's parts, in order to parametrically test the building for fit.

The Building Information Model was created from an existing set of 2d drawings. Rather than creating built-in compliance into a design, I had to model to the specifications.

From that model, shop drawings are created for fabrication of the building.
Stacks Image 1775
BIM Rendering
Stacks Image 1919
BIM
Stacks Image 1921
Shop Drawings
THE WAREHOUSE
One custom building for a developer in Great Abacos, Bahamas. This building was designed to meet the Bahamian Building Code.

The entire process of manufacturing was managed using Merlin project management software. Building Information Modeling was used to create the building's parts, in order to parametrically test the building for fit.

From the model, architectural drawings are generated for permit and shop drawings for fabrication.
GANTT CHART PRODUCTION MANAGEMENT
Stacks Image 1576
Stacks Image 1960
BIM Rendering
Stacks Image 1964
A Sheet
Stacks Image 190
Shop Drawings
Stacks Image 1962
BIM
Stacks Image 188
A Sheet
Stacks Image 192
A Sheet
THE CLINIC
One cabin, in an order of eleven, for a private customer on a private island called Musha Cay in Exuma. Building Information Modeling was used to create the building's parts, in order to parametrically test the building for fit.

The Building Information Model, was created from an existing set of 2d drawings. Rather than creating built-in compliance into a design, I had to model to the specifications.

From that model, shop drawings are created for fabrication of the building.
Stacks Image 1689
BIM Rendering
Stacks Image 50
BIM
Stacks Image 1693
Shop Drawings
LOFT CABINS X 2
Two cabins for a private customer in Potomac, Maryland. These cabins were designed to fully meet the Maryland Building Code.

The entire process of manufacturing was managed using Merlin project management software. Building Information Modeling was used to create the building's parts, in order to parametrically test the building for fit.

From the model, architectural drawings are generated for permit and shop drawings for fabrication.
GANTT CHART PRODUCTION MANAGEMENT
Stacks Image 1072
Stacks Image 1988
BIM Rendering
Stacks Image 1992
A Sheet
Stacks Image 2
Panel Shop Drawings
Stacks Image 56
BIM
Stacks Image 1990
A Sheet
Stacks Image 4
Sheathing Shop Drawings
CREW CABINS X 9
Nine cabins, in an order of eleven, for a private customer on a private island called Musha Cay in Exuma. 2d Cad drawings were used to create the building's parts. This was the last cabin manufactured at Cabin Fever, during my tenure, without parametrics.

This project proved that layering of materials is what benefited most from parametrics, especially with the close tolerances panelized construction demands.

2d Cad drawings did not allow for proper testing of diagrammatic assumptions of materials, which resulted in a slowdown in production and a higher-than-normal waste of materials.
Stacks Image 2002
Spec Crew Cabin Drawing
Stacks Image 2004
Sheathing Shop Drawings
Stacks Image 2006
Panel Shop Drawings
L.A. CARPORT
One building for a private customer in Los Angeles, California. This structure was designed to meet California building, seismic and fire codes.

The entire process of manufacturing was managed using Merlin project management software. Building Information Modeling was used to create the building's parts, in order to parametrically test the building for fit.

From the model, architectural drawings are generated for permit and shop drawings for fabrication.
GANTT CHART PRODUCTION MANAGEMENT
Stacks Image 257
Stacks Image 2018
BIM Rendering
Stacks Image 232
A Sheet
Stacks Image 236
Panels Shop Drawings
Stacks Image 2016
BIM
Stacks Image 234
Parts Shop Drawings
Stacks Image 238
Parts Shop Drawings
SAN FRANCISCO CABINS X 2
Two cabins for a private customer in San Francisco, California. These cabins were designed to meet California building, seismic and fire codes.

Building Information Modeling was used to create the building's parts, in order to parametrically test the building for fit.

From the model, architectural drawings are generated for permit and shop drawings for fabrication.
Stacks Image 65
BIM Rendering
Stacks Image 2032
BIM
Stacks Image 240
Panel Shop Drawings
Stacks Image 2030
BIM Rendering
Stacks Image 2034
BIM
Stacks Image 242
Panel Shop Drawings
THE ATOM PROTOTYPE
A design for a new product line showcasing a proprietary material.
Stacks Image 73
Stacks Image 75
Stacks Image 77
Stacks Image 79
Stacks Image 2058
Stacks Image 71
Stacks Image 2060
Stacks Image 2062
THE GENERAL STORE
A design for the largest prefab building commissioned at Cabin Fever, from a developer in Great Abacos, Bahamas.

The building design never made it past engineering, but it was entirely ready to be put into production as depicted.

The BIM model and architectural drawings were a collaboration between myself and Mike Arnspiger at Cabin Fever.
Stacks Image 2046
BIM
Stacks Image 249
A Sheet
Stacks Image 251
A Sheet
Stacks Image 2044
BIM Rendering
Stacks Image 247
A Sheet
Stacks Image 253
A Sheet
WORKER HOUSING UNIT
A prototype for a prefab worker housing structure.
Stacks Image 105
Stacks Image 109
Stacks Image 113
Stacks Image 177
Stacks Image 2072
Stacks Image 83
Stacks Image 2074
Stacks Image 2076
POOL CABANA
A backyard structure for a private customer in Miami. The structure was designed to meet the Florida Building Code.

RC Engineering was the outside consultant, who engineered and drew the construction documents for permit. My duties were to coordinate the design and make certain that our manufacturing standards were met, during the design development phase.
Stacks Image 2090
A Sheet
Stacks Image 255
S Sheet
Stacks Image 2086
Dirty SketchUp Rendering
Stacks Image 2088
A Sheet
INLAWS QUARTERS PROTOTYPE
Stacks Image 2102
Stacks Image 2100
VERMONT CABIN
A cabin in the design development phase. The BIM model increased in detail, as structural elements were individually added. As depicted, this project was being prepared for permitting.
Stacks Image 2118
Sections
Stacks Image 2114
BIM
Stacks Image 2116
Preliminary Sketches
ZIP CABIN
The Zip Cabin product offered by Cabin Fever needed a spec solution that would allow for rapid permitting by customers.

A Building Information Model was created, along with architectural sheets and engineering, in order to satisfy the requirements.
Stacks Image 2130
BIM and Rendering
Stacks Image 2128
Rendering
Stacks Image 2132
A Sheet
MIXED CABINS
A Zip Cabin was offered as a prize to a contest. A rendering and floor plan were generated. A cabin on the edge of Lake Michigan needed a color scheme (one of many). An event organizer for the America's Cup ordered two cabins (depicted rendering was sent with proposal).
Stacks Image 2146
Prized Cabin Floor Plan Diagram
Stacks Image 179
America's Cup Cabins Rendering
Stacks Image 2142
Prized Cabin Rendering
Stacks Image 2144
Lake Michigan Cabin Color Scheme
Top